Regular price $925.00
Shipping calculated at checkout.


The Scapegoat is a non-suspension corrected rigid mountain/ touring bike thats got every mount and braze-on you'd ever need to ride from Alaska to Peru or conquer the Continental Divide. If you're not the touring type or maybe you're just looking for something to get loose on, the Goat has internal dropper routing and the geometry to get you free-riding the mountain with the best of them. Imagine what a legend you'll look like plowing though rock gardens, sand dunes, and over small commuter cars on your 27.5x3.8" tires. The Small (59cm) Goat is based around 26+ or 24" fat, while all of the other sizes are based around 27.5+ or 26" fat. 

Did I mention each Scapegoat comes with a free Scapegoat Headtube Badge already installed?

Build Notes:

Takes a mountain crank. You could go 1x with a maximum 34 tooth chainring or if you're going Fat it's recommended to run it single speed or with an internally geared hub.

The Small Scapegoat is based off 26+ with a max 3" tire clearance or you can run 24" Fat and clear a 4" tire. THIS JUST IN: The Small Goat can also fit 27.5x2.25 and be a total little RIPPER!

Every other size (M, L, XL) Is based around 27.5+ with your max tire size being ~3.8", but can be set up 26" fat with clearance up to a 4" tire Front and Rear. You can also set it up 29" with a max 3" front and 2.8" rear but this will raise the bb height. Not a bad thing, but something to be aware of.

The Scapegoat has Boost Spacing front and rear. 15x110 front and 12x148 rear.

The Rocker Dropouts make it easy to set the Goat up Single Speed or with a Rohloff or some other internally geared boost hub. If you're looking for a dedicated boost SS hub the Paul Word Boost hub is a good choice.

The Scapegoat does not have a split to route a belt through for belt drive. You can run a Split Belt but its up to you to figure all of that out.

Front brake is I.S. Mount and takes an adaptor to fit a caliper. The Rear brake is I.S. (Post Mount) as well, but you can bolt a caliper straight to the Rocker Dropout and clear a 160mm rotor. If you're struggling to find a brake setup, the Crust Palm Oil Brake Kit will help solve that problem.

Max Rotor Size: 203mm Front | 180mm Rear

Front and rear thru axles are included.


Handmade in Taiwan using Heat Treated Chromoly

Tig Welded

Color- Red Crackle

Sizes- Small 59cm | Medium 62cm | Large 65cm | Extra Large 68cm

Head Tube Diameter- 1 1/8" (Threadless Steerer)

Bottom Bracket- 73mm English (BSA) Threaded

Steerer Tube Length- 350mm

Axel to crown-432mm

Fork Spacing- 15x110mm

Rear End Spacing- 12x148mm

Front Axle Thread Pitch & Length- 1.5x135mm

Rear Axle Thread Pitch & Length- 1.5x173mm

Seat Post Diameter- 31.6mm

Seat Post Clamp Diameter- 35.0mm

Weight (TBD)- Frame- kg or lbs | Fork- kg or lbs